Space systems — Bellows — Design and operation
Introduction: The bellows for space systems is usually used under severe conditions, such as high pressure, extremely low temperatures, large deflection, or high inner flow speed. The design safety factor of the bellows tends to be small to satisfy two different function requirements simultaneously. One is the function of the pressure bearing component, which all pressure components have; and the other is the special function to accommodate installation misalignment, thermal expansion or contraction and displacement induced by large deformation of the pressurized propellant tank. There are many items to be considered for design and manufacture such as hoop stress, bulging stress, buckling strength, flow-induced vibration, and cyclic deflection. This document aims to ensure safe and reliable bellows hardware and operations. Some examples of the design safety factors are shown in Annex A. The requirements in this document are not intended to be different from the requirements also applicable for bellows included in ISO 24638. © ISO 2025 – All rights reserved
Scope: This document specifies general and detailed requirements for bellows used in space systems. It establishes requirements regarding material, design, analysis, fabrication, material, testing, inspection, and operation for space use. This document is applicable to metallic bellows which are used as pressure bearing components and are integrated into a pressure system. This document is not applicable to engine bellows or valve bellows.