ISO 1083-2018 PDF

ISO 1083-2018 PDF

Spheroidal graphite cast irons - Classification

$129.00 $258.00 -50%
Product Code: ISO 1083
Stock In Stock
Edition: 4TH
Published: 04/2018
Number of Pages: 46
File Size: 1 file, 1 Byte

Available Options

Product Description

Spheroidal graphite cast irons - Classification

Introduction: The properties of spheroidal graphite cast irons depend on their structure. Spheroidal graphite cast irons covered by this document are divided into two groups: a) ferritic to pearlitic spheroidal graphite cast irons; b) solid-solution strengthened ferritic spheroidal graphite cast irons. The mechanical properties of the material can be evaluated on machined test pieces prepared from the following: — separately cast samples; — side-by-side cast samples; — cast-on samples; — samples cut from a casting. The material grade is defined by mechanical properties measured on machined test pieces prepared from cast samples. If hardness is a requirement of the purchaser as being important for the application, then Annex E provides means for its determination. It is well known that tensile properties and hardness of spheroidal graphite cast irons are interrelated. When considered by the purchaser as being important for the application, both tensile and hardness properties may be specified. Some material grades can be suitable for pressure applications. Further technical data on spheroidal graphite cast irons is given in Annexes C and G. vi © ISO 2018 – All rights reserved

Scope: This document defines the grades and the corresponding requirements for spheroidal graphite cast irons. This document specifies two groups of spheroidal graphite cast iron grades by a classification based on mechanical properties measured on machined test pieces prepared from cast samples. The first group deals mainly with ferritic to pearlitic grades. The second group deals with solid-solution strengthened ferritic grades. This document also gives an informative classification as a function of hardness. This document does not apply to the following: — spheroidal graphite cast irons used for pipes, fittings and accessories which are specified in accordance with ISO 2531 and ISO 7186; — highly alloyed (austenitic) spheroidal cast irons which are specified in accordance with ISO 2892; — ausferritic cast irons which are specified in accordance with ISO 17804.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 1083-2018 PDF

ISO 1083-2018 PDF

$129.00 $258.00