Rough-terrain trucks - Safety requirements and verification - Part 4: Additional requirements for variable-reach trucks handling freely suspended loads
Introduction: This International Standard is one of a set of standards produced by ISO/TC 110/SC 4 as part of its program of work regarding standardization of terminology, general safety, performance and user requirements for rough-terrain trucks (hereafter also referred to as trucks). This document is a type C standard as stated in ISO 12100. This document is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety: — machine manufacturers (small, medium and large enterprises); — health and safety bodies (regulators, accident prevention organisations, market surveillance, etc.). Others can be affected by the level of machinery safety achieved with the means of the document by the above-mentioned stakeholder groups: — machine users/employers (small, medium and large enterprises); — machine users/employees (e.g. trade unions, organizations for people with special needs); — service providers, e.g. for maintenance (small, medium and large enterprises); — consumers (in the case of machinery intended for use by consumers) The above-mentioned stakeholder groups have been given the possibility to participate at the drafting process of this document. The machinery and systems concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the scope of this document. When requirements of this type‑C standard are different from those which are stated in type‑A or type‑B standards
Scope: This part of ISO 10896 specifies the additional safety requirements and means of verification for rough- terrain variable-reach trucks (hereafter referred to as trucks) fitted with a lifting attachment for handling suspended loads which can swing freely in one or more directions. It is applicable to trucks covered by ISO 10896-1 and ISO 10896-2. This part of ISO 10896 does not apply to: — the lifting of suspended loads which by design of the load or the lifting attachments does not allow the load to swing freely in any direction; — the handling of flexible intermediate bulk containers, as defined in ISO 21898, carried under the forks of the truck; — any attachments/means used for lifting personnel; — lifting accessories not included as part of the lifting attachment; — freight container handling trucks. This part of ISO 10896 deals with significant hazards, hazardous situations or hazardous events relevant to trucks handling a freely suspended load, when they are used as intended by the manufacturer. This part of ISO 10896 is not applicable to rough-terrain variable-reach trucks fitted with a lifting attachment for handling suspended loads manufactured before the date of its publication.