ISO 10896-8-2024 PDF

ISO 10896-8-2024 PDF

Rough-terrain trucks-Safety requirements and verification-Part 8: Requirements for trucks designed for towing

$96.50 $193.00 -50%
Product Code: ISO 10896-8
Stock In Stock
Edition: 1.
Published: 10/2024
Number of Pages: 28
File Size: 1 file, 1 Byte

Available Options

Product Description

Rough-terrain trucks — Safety requirements and verification — Part 8: Requirements for trucks designed for towing

Introduction: This document is a type-C standard as stated in ISO 12100. This document is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety: — machine manufacturers (small, medium and large enterprises); — health and safety bodies (regulators, accident prevention organizations, market surveillance, etc.). Others can be affected by the level of machinery safety achieved with the means of the document by the above-mentioned stakeholder groups: — machine users/employers (small, medium and large enterprises); — machine users/employees (e.g. trade unions, organizations for people with special needs); — service providers, e.g. for maintenance (small, medium and large enterprises); — consumers (in case of machinery intended for use by consumers). The above-mentioned stakeholder groups have been given the possibility to participate in the drafting process of this document. The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the Scope of this document. When requirements of this type-C standard are different from those which are stated in type-A or type-B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard. © ISO 2024 – All rights reserved

Scope: This document specifies safety requirements and verification for rough-terrain variable-reach trucks and slewing rough-terrain variable-reach trucks as defined in ISO 10896-1 and ISO 10896-2 (hereafter referred to as “trucks”) designed for towing trailers or towed equipment or both (hereafter referred to as “towed vehicles”) with a maximum design speed less than or equal to 40 km/h, taking into account the intended use as well as the reasonably foreseeable misuse. NOTE Local regulations can apply when trucks are used to tow towed vehicles on public roads. The significant hazards dealt with in this document are mechanical hazards (see ISO 12100:2010, Table B.1) due to: — acceleration, deceleration; — instability; — kinetic energy; — machinery mobility; — stored energy. This document is not applicable to trucks intended to tow a towed vehicle equipped with a: a) complex electronic control system for braking or electronically-controlled braking system (EBS); b) braking system where the braking force applied to one wheel can be different from the braking force applied to the other wheel of the same axle (differential braking system); c) braking system where the energy source that provides the energy required to actuate the brakes is a vacuum pump (vacuum braking system); d) part of a service braking system which automatically controls the degree of slip, in the direction of rotation of the wheel, on one or more wheels of the towed vehicle or truck during braking (anti-lock braking system or ABS); e) additional braking system having the capability to provide and to maintain a braking effect over a long period of time without a significant reduction in performance, including the control device which can comprise a single device or a combination of several devices each of which can have its own control (endurance braking system). This document does not provide requirements for the towed vehicles themselves. This document is not applicable to trucks manufactured before the date of its publication. © ISO 2024 – All rights reserved ISO 10896-8:2024(en) 2 Normative references The following documents are referred to in the text in such a way that some or all of their conten

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 10896-8-2024 PDF

ISO 10896-8-2024 PDF

$96.50 $193.00