ISO 1101-2017 PDF

ISO 1101-2017 PDF

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out

$60.00 $120.00 -50%
Product Code: ISO 1101
Stock In Stock
Edition: 4TH
Published: 02/2017
Number of Pages: 154
File Size: 1 file, 21 Bytes

Available Options

Product Description

Technical Drawings - Geometrical Tolerancing - Tolerancing of Form, Orientation, Location and Run-Out - Generalities, Definitions, Symbols, Indications on Drawings

Introduction: This document is a geometrical product specification (GPS) standard and is to be regarded as a general GPS standard (see ISO 14638). It influences chain links A, B and C of the chain of standards on form, orientation, location and run out. The ISO GPS Masterplan given in ISO 14638 gives an overview of the ISO GPS system of which this document is a part. The fundamental rules of ISO GPS given in ISO 8015 apply to this document. The default decision rules given in ISO 14253-1 apply to specifications made in accordance with this document, unless otherwise stated. For more detailed information on the relation of this document to the GPS matrix model, see Annex G. This document represents the initial basis and describes the required fundamentals for geometrical tolerancing. Nevertheless, it is advisable to consult the separate standards referenced in Clause 2 and in Tables 3 and 4 for more detailed information. For the presentation of lettering (proportions and dimensions), see ISO 3098-2. All figures in this document for the 2D drawing indications have been drawn in first-angle projection with dimensions and tolerances in millimetres. It should be understood that third-angle projection and other units of measurement could have been used equally well without prejudice to the principles established. For all figures giving specification examples in 3D, the dimensions and tolerances are the same as for the similar figures shown in 2D. The figures in this document represent either 2D

Scope: This document defines the symbol language for geometrical specification of workpieces and the rules for its interpretation. It provides the foundation for geometrical specification. The illustrations in this document are intended to illustrate how a specification can be fully indicated with visible annotation (including e.g. TEDs). NOTE 1 Other International Standards referenced in Clause 2 and in Tables 3 and 4 provide more detailed information on geometrical tolerancing. NOTE 2 This document gives rules for explicit and direct indications of geometrical specifications. Alternatively, the same specifications can be indicated indirectly in accordance with ISO 16792 by attaching them to a 3D CAD model. In this case, it is possible that some elements of the specification are available through a query function or other interrogation of information on the model instead of being indicated using visible annotation.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 1101-2017 PDF

ISO 1101-2017 PDF

$60.00 $120.00