Assembly, adjustment and inspection of an alpine ski/binding/boot (S–B–B) system
Introduction: International Standards exist for the components of the alpine ski/binding/boot (S-B-B) system, mainly intended for the component manufacturers. An International Standard, ISO 8061, also exists for the selection of release values. This document is intended primarily for retailers. However, its aim is to include, in one text, the different phases of the choice of components, their assembly, adjustment and inspection in the form of practical procedures, and to provide tolerances for inspection and adjustment. It can be used by all individuals and institutions concerned with those procedures. The inspection procedures and tolerances described in this document apply to the condition of the S-B-B system before it leaves the ski shop to judge the condition of the equipment once it is put into use and for periodic verification of used equipment. © ISO 2023 – All rights reserved
Scope: This document specifies assembly, adjustment and inspection procedures for the binding mechanisms of skis, integrating, in a practical way, the requirements of International Standards which are related to skis, bindings and boots. It is applicable to a ski-binding-boot system (S-B-B) for alpine skiing, of which at least one component is owned by the user. This document is applicable for complete and incomplete alpine ski-binding-boot systems which are owned by the user or rented for 15 days or more. NOTE ISO 13993 gives a method of measurement for equipment which is rented for less than 15 days.