ISO 11127-8-2020 PDF

ISO 11127-8-2020 PDF

Preparation of steel substrates before application of paints and related products-Test methods for non-metallic blast-cleaning abrasives-Part 8: Field determination of water-soluble chlorides

$31.50 $63.00 -50%
Product Code: ISO 11127-8
Stock In Stock
Edition: 1ST
Published: 10/2020
Number of Pages: 12
File Size: 1 file, 932 Bytes

Available Options

Product Description

Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 8: Field determination of water-soluble chlorides

Introduction: The use of non-metallic abrasive blast media is common practice for dry and wet surface cleaning and blasting for substrate preparation prior to coating application. The non-metallic abrasive media are taken from their natural environment which may contain various soluble salt contaminants including chloride salts. High chloride salt concentrations in the abrasive blast media may provide for transfer of the chloride ions to the substrate during the blasting process which would then cause premature failure of the applied coating. To limit the risk of contaminating the steel surface from contaminants in the abrasive media, the chloride levels are quantified with ion specific testing methods that are referenced in this document. This document provides guidance on analysing specifically for the chloride ion in the presence of other less / non-corrosive salts such as nitrates and carbonates. This document is a part of the ISO 11127 series that deals with the sampling and testing of non-metallic abrasives for blast-cleaning. The types of non-metallic abrasive and requirements on each are contained in ISO 11126. The ISO 11126 and ISO 11127 series have been drafted as a coherent set of documents on non-metallic blast-cleaning abrasives. Information on all parts of both series is given in Annex A. © ISO 2020 – All rights reserved

Scope: This document specifies a field method for the determination of water-soluble chlorides in non-metallic blast-cleaning abrasives. This field method is provided as a kit with all components and premeasured extraction solution. This document differs from ISO 11127-7 in that equal volumes of the sample of abrasive and extraction solution are used for the determination of chloride level in the abrasive. In comparison, ISO 11127-7 uses a weight to volume ratio of abrasive to solvent (deionized water) to extract soluble salts from the abrasive. It is intended for use in the field as compared to ISO 11127-7, which is well suited for use in the laboratory.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 11127-8-2020 PDF

ISO 11127-8-2020 PDF

$31.50 $63.00