ISO 11137-2-2013 PDF

ISO 11137-2-2013 PDF

Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose

$60.00 $120.00 -50%
Product Code: ISO 11137-2
Stock In Stock
Edition: 3.
Published: 06/01/2013
Number of Pages: 76
File Size: 1 file, 794 Bytes

Available Options

Product Description

Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose

Introduction: This part of ISO 11137 describes methods that can be used to establish the sterilization dose in accordance with one of the two approaches specified in 8.2 of ISO 11137-1:2006. The methods used in these approaches are: — dose setting to obtain a product-specific dose; — dose substantiation to verify a preselected dose of 25 kGy or 15 kGy. The basis of the dose setting methods described in this part of ISO 11137 (Methods 1 and 2) owe much to the ideas first propounded by Tallentire[19][20][21]. Subsequently, standardized protocols were developed[10][11], which formed the basis of the dose setting methods detailed in the AAMI Recommended Practice for Sterilization by Gamma Radiation[6][8]. Methods 1 and 2 and the associated sterilization dose audit procedures use data derived from the inactivation of the microbial population in its natural state on product. The methods are based on a probability model for the inactivation of microbial populations. The probability model, as applied to bioburden made up of a mixture of various microbial species, assumes that each such species has its own unique D10 value. In the model, the probability that an item will possess a surviving microorganism after exposure to a given dose of radiation is defined in terms of the initial number of microorganisms on the item prior to irradiation and the D10 values of the microorganisms. The methods involve performance of tests of sterility on product items that have received doses of radiation lower than

Scope: This part of ISO 11137 specifies methods for determining the minimum dose needed to achieve a specified requirement for sterility and methods to substantiate the use of 25 kGy or 15 kGy as the sterilization dose to achieve a sterility assurance level, SAL, of 10−6. This part of ISO 11137 also specifies methods of sterilization dose audit used to demonstrate the continued effectiveness of the sterilization dose. This part of ISO 11137 defines product families for sterilization dose establishment and sterilization dose audit.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 11137-2-2013 PDF

ISO 11137-2-2013 PDF

$60.00 $120.00