ISO 11158-2023 PDF

ISO 11158-2023 PDF

Lubricants, industrial oils and related products (class L)-Family H (hydraulic systems)-Specifications for categories HH, HL, HM, HV and HG

$96.50 $193.00 -50%
Product Code: ISO 11158
Stock In Stock
Edition: 3.
Published: 10/2023
Number of Pages: 28
File Size: 1 file, 1 Byte

Available Options

Product Description

Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG

Introduction: Fluids for hydraulic systems are used in a wide variety of hydraulic pumps, motors and circuits. Hydraulic fluids are selected depending upon the anti-wear requirements of the equipment and the operating temperature range (temperature at cold starting and running temperature in stabilized conditions) to ensure the optimum mechanical and volumetric yield of the circuit and to protect pumps and motors against wear. Mineral hydraulic fluids are formulated with mineral base stocks, from either groups I, II or III and various additives to provide the necessary oxidation stability, wear, rust, corrosion and foaming protection properties. To improve the operating temperature range, viscosity modifier polymers are added. © ISO 2023 – All rights reserved

Scope: This document specifies the minimum requirements for new mineral oil hydraulic fluids and is intended for hydraulic systems, particularly for hydrostatic hydraulic fluid power application. The purpose of this document is to guide suppliers and end users of mineral oil hydraulic fluids and to direct equipment manufacturers of hydraulic systems. This document is written in a general form so that its application can accommodate various climatic conditions. This document also stipulates the requirements for mineral-oil hydraulic fluids at the time of delivery. This document is intended to be used in conjunction with ISO 6743-4, which classifies fluids used in hydraulic applications. Among the categories covered by ISO 6743-4, only five types of mineral oil- based fluids are covered in this document. These categories are HH, HL, HM, HV and HG. This document does not cover the extreme cases of use in terms of hydraulic circuits design, temperature and extreme conditions. NOTE For use in exceptional conditions, suppliers and purchasers of lubricants can mutually agree upon additional testing methods and acceptability criteria of the products.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 11158-2023 PDF

ISO 11158-2023 PDF

$96.50 $193.00