ISO 11277-2020 PDF

ISO 11277-2020 PDF

Soil quality-Determination of particle size distribution in mineral soil material-Method by sieving and sedimentation

$60.00 $120.00 -50%
Product Code: ISO 11277
Stock In Stock
Edition: 3.
Published: 04/2020
Number of Pages: 46
File Size: 1 file, 2 Bytes

Available Options

Product Description

Soil Quality - Determination of Particle Size Distribution in Mineral Soil Material - Method by Sieving and Sedimentation

Introduction: The physical and chemical behaviour of soils is controlled in part by the amounts of mineral particles of different sizes in the soil. The subject of this document is the quantitative measurement of such amounts (expressed as a proportion or percentage of the total mass of the mineral soil), within stated size classes. The determination of particle size distribution is affected by organic matter, soluble salts, cementing agents (like iron compounds), relatively insoluble substances such as carbonates and sulfates, or combinations of these. Some soils change their behaviour to such a degree, upon drying, that the particle size distribution of the dried material bears little or no relation to that of the undried material encountered under natural conditions. This is particularly true of soils rich in organic matter, those developed from recent volcanic deposits, some highly weathered tropical soils, and soils often described as “cohesive” (see Reference [4]). Other soils, such as the so-called “sub-plastic” soils of Australia, show little or no tendency to disperse under normal laboratory treatments, despite field evidence of large clay content. The procedures given in this document recognize these kinds of differences between soils from different environments, and the methodology presented is designed to deal with them in a structured manner. Such differences in soil behaviour can be very important, but awareness of them depends usually on local knowledge. Given that the labor

Scope: This document specifies a basic method of determining the particle size distribution applicable to a wide range of mineral soil materials, including the mineral fraction of organic soils. It also offers procedures to deal with the less common soils mentioned in the introduction. This document has been developed largely for use in the field of environmental science, and its use in geotechnical investigations is something for which professional advice might be required. A major objective of this document is the determination of enough size fractions to enable the construction of a reliable particle-size-distribution curve. This document does not apply to the determination of the particle size distribution of the organic components of soil, i.e. the more or less fragile, partially decomposed, remains of plants and animals. It is also realized that the chemical pre-treatments and mechanical handling stages in this document could cause disintegration of weakly cohesive particles that, from field inspection, might be regarded as primary particles, even though such primary particles could be better described as aggregates. If such disintegration is undesirable, then this document is not used for the determination of the particle size distribution of such weakly cohesive materials.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 11277-2020 PDF

ISO 11277-2020 PDF

$60.00 $120.00