Véhicules routiers - Méthodes d'essai d'un équipement soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite - Partie 8: Méthodes d'immunité aux champs magnétiques
Introduction: Immunity measurements of complete road vehicles are generally able to be carried out only by the vehicle manufacturer, owing to, for example, high costs of absorber-lined shielded enclosures, the desire to preserve the secrecy of prototypes, or a large number of different vehicle models. For research, development, and quality control, a laboratory measuring method can be used by both vehicle manufacturers and equipment suppliers to test electronic components. ISO 11452-1 specifies general test conditions, definitions, practical use, and basic principles of the test procedure. © ISO 2015 – All rights reserved
Scope: This part of ISO 11452 specifies tests for electromagnetic immunity of electronic components for passenger cars and commercial vehicles, regardless of the propulsion system (e.g. spark-ignition engine, diesel engine, electric motor), to magnetic fields. These sources are classified into “internal magnetic field” (sources internal to the vehicle, e.g. vehicle electro-mechanical motors, actuators,...) and “external magnetic field” (sources external to the vehicle e.g. power transmission lines, generating stations,…). To perform this test, the device under test (DUT) is exposed to a magnetic disturbance field. The radiating loop method can be applied to small DUTs or to larger DUTs by positioning the coil in multiple locations. The Helmholtz coil is sometimes used as an alternative method. This technique is limited by the relationship between the size of the DUT and the size of the coils. The electromagnetic disturbances considered in this part of ISO 11452 are limited to continuous narrowband electromagnetic fields.