ISO 11465-2025 PDF

ISO 11465-2025 PDF

Sludge and solid environmental matrices-Determination of dry residue or water content and calculation of the dry matter fraction on a mass basis

$48.00 $96.00 -50%
Product Code: ISO 11465
Stock In Stock
Edition: 2.
Published: 08/2025
Number of Pages: 20
File Size: 1 file, 1 Byte

Available Options

Product Description

Sludge and solid environmental matrices — Determination of dry residue or water content and calculation of the dry matter fraction on a mass basis

Introduction: In case of analysis of solids and sludge, water is usually not considered as part of the sample and results are generally related to dry matter, which can be calculated by determination of the dry residue (dry matter fraction). For this purpose, and for the determination of the water content, two methods are specified in this document. The choice of the method depends on the type of sample and its content of volatile substances excluding water. As a result of the validation study, the determination of water content by azeotropic distillation has been replaced by Karl Fischer titration. Nevertheless, the distillation can be useful in certain cases. This document is applicable and validated for several types of matrices as indicated in Table 1 (see also Annex A for the results of the validation). Table 1 — Matrices for which this document is applicable and validated Matrix Materials used for validation Sludge (only method A) Municipal sludge Biowaste (only method A) Fresh compost Soil (only method A) Sludge amended soil Waste (methods A and B) Contaminated soil Dredged sludge Nickel sludge Filter cake Distillation residue Drilling emulsion © ISO 2025 – All rights reserved

Scope: This document specifies methods for the calculation of the dry matter fraction of sludge, sludge products, treated biowaste, soil and waste for which the results of performed analysis are calculated to the dry matter basis. Depending on the nature and origin of the sample, the calculation is based on a determination of the dry residue (method A) or a determination of the water content (methods A and B). It applies to samples containing more than 1 % (mass fraction) of dry residue or more than 1 % (mass fraction) of water. Method A applies to sludge, sludge products, treated biowaste, soil and solid waste. Method B applies to liquid waste and to samples which are suspected or known to contain volatiles except for water.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 11465-2025 PDF

ISO 11465-2025 PDF

$48.00 $96.00