ISO 11500-2022 PDF

ISO 11500-2022 PDF

Hydraulic fluid power-Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle

$60.00 $120.00 -50%
Product Code: ISO 11500
Stock In Stock
Edition: 3.
Published: 12/2022
Number of Pages: 28
File Size: 1 file, 1 Byte

Available Options

Product Description

Transmissions hydrauliques - Détermination du niveau de pollution particulaire d’un échantillon liquide par comptage automatique des particules par absorption de lumière

Introduction: In hydraulic fluid power systems, power is transmitted and controlled through a liquid under pressure within an enclosed circuit. The liquid is both a lubricant and a power-transmitting medium. The presence of solid contaminant particles in the liquid interferes with the ability of the hydraulic fluid to lubricate and causes wear to the components. The extent of contamination in the fluid has a direct bearing on the performance and reliability of the system, and it is essential to control solid contaminant particles to levels that are considered appropriate for the system concerned. A quantitative determination of particulate contamination involves precision in obtaining the sample and in determining the extent of contamination. The liquid automatic particle counter (APC), which works on the light-extinction principle, has become an accepted means of determining the extent of contamination. The accuracy of particle count data can be affected by the techniques used to obtain such data. This document details procedures for the analysis of contaminated liquid samples using an automatic particle counter. Correct use of an automatic particle counter helps to reduce errors and enhances the accuracy of reproducibility in data. © ISO 2022 – All rights reserved

Scope: This document specifies an automatic particle counting procedure for determining the number and sizes of particles present in hydraulic-fluid bottle samples of clear, homogeneous, single-phase liquids using an automatic particle counter (APC) that works on the light-extinction principle. This document is applicable to the monitoring of: a) the cleanliness level of fluids circulating in hydraulic systems; b) the progress of a flushing operation; c) the cleanliness level of support equipment and test rigs; d) the cleanliness level of packaged stock fluid. NOTE Measurements can be made with particles suspended in the original liquid or in a sample of the liquid diluted with a compatible liquid when APC coincidence error limits are exceeded.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 11500-2022 PDF

ISO 11500-2022 PDF

$60.00 $120.00