ISO 11553-1-2020 PDF

ISO 11553-1-2020 PDF

Safety of machinery-Laser processing machines-Part 1: Laser safety requirements

$96.50 $193.00 -50%
Product Code: ISO 11553-1
Stock In Stock
Edition: 2ND
Published: 04/2020
Number of Pages: 30
File Size: 1 file, 1 Byte

Available Options

Product Description

Safety of machinery — Laser processing machines — Part 1: Laser safety requirements

Introduction: The Machinery Safety Directive issued by the European Parliament and the Council of the EC outlines essential and mandatory requirements that must be met in order to ensure that machinery is safe. In response, CEN/CENELEC initiated a programme to produce safety standards for machines and their applications. This document is one in that series. It has been prepared as a harmonized standard to provide a means of conforming to the essential safety requirements of the Machinery Directive and associated EFTA Regulations. This document is a type B standard as stated in ISO 12100. The provisions of this document may be supplemented or modified by a type C standard. For machines which are covered by the scope of a type C standard and which have been designed and built according to the provision of that standard, the provisions of that type C standard take precedence over the provisions of this type B standard. The purpose of this document is to prevent injuries to persons by — listing potential laser radiation hazards generated by machines containing lasers, — specifying safety measures and verifications necessary for reducing the risk caused by specific hazardous conditions, — providing references to pertinent standards, and — specifying the information which is to be supplied to the users so that they can establish proper procedures and precautions. © ISO 2020 – All rights reserved

Scope: This document describes laser radiation hazards arising in laser processing machines, as defined in 3.7. It also specifies the safety requirements relating to laser radiation hazards, as well as the information to be supplied by the manufacturers of such equipment (in addition to that prescribed by IEC 60825). Requirements dealing with noise as a hazard from laser processing machines are included in ISO 11553-3:2013. This document is applicable to machines using laser radiation to process materials. It is not applicable to laser products, or equipment containing such products, which are manufactured solely and expressly for the following applications: — photolithography; — stereolithography; — holography; — medical applications (per IEC 60601-2-22); — data storage.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 11553-1-2020 PDF

ISO 11553-1-2020 PDF

$96.50 $193.00