Vêtements de protection pour sapeurs-pompiers - Méthodes d'essai et exigences de performance
Introduction: The purpose of this document is to provide minimum performance requirements for protective clothing designed to protect firefighters who are engaged in support activities associated with interior attack firefighting. This document is intended for firefighters who are engaged in support activities associated with interior attack firefighting. It is not intended for firefighters who are engaged in interior attack firefighting. Interior attack firefighting and support activities of firefighting are defined in 3.8.1 and 3.8.2. It provides guidance on the considerations for conducting a risk assessment of firefighting risks (see Annex A). vi © ISO 2017 – All rights reserved
Scope: This document specifies test methods and minimum performance requirements for protective clothing used by firefighters who are engaged in support activities of firefighting. This clothing is not intended for interior attack firefighting. These support activities of firefighting are defined (see 3.8.2) as activities such as: — water and material supply; — extinguishing fires from the outside of the structure; — prevention of exterior spreading to adjacencies, preventing enviromental damage and limiting effect of smoke; — securing traffic and environment; — first aid base activities; — preparing the fire ground for subsequent activities; — RPD replenishment tasks; — assessment zone; — BA communication; — forward command post; — evacuation; — assist planning; — assist logistics; — assist communication; — transportation. This document covers the general clothing design, the minimum performance levels of the materials used, and the methods of test for determining these performance levels. This document is not equivalent to ISO 11999-3, clothing worn by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures. This document provides lower minimum level of protection. Selection of the appropriate system of clothing is dependent on carrying out an effective risk assessment which identifies the hazards to be faced, evaluates the likelihood of those hazards, and provides the means to reduce or eliminate these hazards. Details of one example of a recommended risk assessment approach and some factors for consideration are included in Annex A This document does not cover special clothing for use in other high risk situations such as specialized firefighting, or clothing for use in long term firefighting operations in high ambient temperature, for example bush, wildland, or forest firefighting where clothing according to ISO 15384 could be more INTERNATIONAL STANDARD ISO 11613:2017(E) © ISO 2017 – All rights reserved ISO 11613:2017(E) appropriate. It does not cover clothing for use in high-risk fire exposures, for example reflective protective clothing according to ISO 15538 could be more appropriate. It does