ISO 11711-1-2019 PDF

ISO 11711-1-2019 PDF

Ships and marine technology-Aquatic nuisance species-Part 1: Ballast water discharge sample port

$48.00 $96.00 -50%
Product Code: ISO 11711-1
Stock In Stock
Edition: 2ND
Published: 05/2019
Number of Pages: 20
File Size: 1 file, 1 Byte

Available Options

Product Description

Ships and marine technology — Aquatic nuisance species — Part 1: Ballast water discharge sample port

Introduction: This document provides guidance to shipboard personnel and other concerned parties on designs, installations and procedures required to obtain representative samples of ballast water from the ballast water discharge piping prior to discharge. ISO 11711-1 defines arrangements for shipboard ballast piping and fittings that are independent of the sampling apparatus used by sampling teams. ISO 11711-21) will provide guidance on the selection and use of sampling apparatus needed to collect and process the samples on board the vessel. These concepts are illustrated in Figure 1. A future part will provide methodologies to analyse the samples and determine compliance with ballast water discharge regulations. Sampling is intended to determine whether ballast water is in compliance with regulatory discharge standards, such as during the installation or evaluation of ballast water treatment equipment, periodic ballast water discharge assessments or during a port state control inspection of the ballast water being discharged. The sampling guidance provided by the ISO 11711 series is intended to support measurement of organism counts in ballast discharge piping consistent with the requirements of the International Maritime Organisation (IMO) D-2 discharge standard. Such measurement requires the collection and analysis of representative samples, i.e. the makeup of the sample is representative of the water flowing in the ballast pipe over the period of sample collection. The guidance provid

Scope: This document specifies requirements for the design and the fitting arrangements of ballast water discharge sample ports. In coordination with the vessel, a suitable sample collection probe is installed into the shipboard sample port as needed to collect ballast samples, and the port is sealed with a blind flange at other times. This document addresses the location of sample ports to accommodate representative sampling, and it standardizes the presentation of the port to accommodate various probe configurations. It provides specifications for a return port to the ballast line downstream of the sample collection port, allowing processed sample water to be returned to the ballast pipe. The appropriate sample probe and other sample collection apparatus is determined by the sample collection team according to the requirements of ISO 11711-2. NOTE The distinction between the sample port discussed in this document and the sample probe discussed in ISO 11711-2 is worth noting. The sample port is a permanent apparatus designed and installed in the ship's ballast piping to accept multiple sample probe configurations. The sample probe is a temporarily installed water collection pipe designed by the sampling party to mate with the sample port and to meet the measurement objectives of the sample. This document is applicable to ships with a ballast discharge pipe size of DN 100 or greater, with turbulent flows. Guidance for smaller ballast pipe diameters is given in Annex A. This document primarily addresses the collection of ballast water discharge samples. Optional requirements for installation of sample ports intended to collect uptake samples are provided in Annex B.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 11711-1-2019 PDF

ISO 11711-1-2019 PDF

$48.00 $96.00