Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
Introduction: The series of ISO 11843 is based on the probability distributions of the net state variable (measurand) for both the linear and nonlinear calibration situations. The focus is implicitly, though sometimes explicitly, on the uncertainty associated with an estimate of the measured response predominantly coming from the baseline noise in instrumental analysis. In many, if not most, analytical instruments, the baseline noise is considered the prime cause of uncertainty when the sample amount is as low as the minimum detectable value. Within its domain of applicability, the method given in this document can dispense with the repetition of real samples, thus helping to improve global environments by saving time and energy that would be required by repetition. Background noise exists ubiquitously in analytical instruments, whether or not a sample is applied to the instrument. This document is concerned with mathematical methodologies for estimating the minimum detectable value in case that the most predominant source of measurement uncertainty is background noise. The minimum detectable value can directly and mathematically be derived from the stochastic characteristics of the background noise. The basic concept of this document is the mathematical description of the probability distribution of the response variable in terms of mathematically well-defined random processes. This description straightforwardly leads to the minimum detectable value. As for the relation of the response an
Scope: This document specifies the practical use of the fundamental concepts in ISO 11843 in case of the background noise predominance in instrumental analysis. This document specifies basic methods to — extract the stochastic properties of the background noise, — use the stochastic properties to estimate the SD or CV of the response variable, and — calculate the minimum detectable value based on the SD or CV obtained above. The methods described in this document are useful for checking the detection of a certain substance by various types of measurement equipment in which the background noise of the instrumental output predominates over the other sources of measurement uncertainty. Feasible choices are visible and ultraviolet absorption spectrometry, atomic absorption spectrometry, atomic fluorescence spectrometry, luminescence spectrometry, liquid chromatography and gas chromatography.