ISO 11898-1-2024 PDF

ISO 11898-1-2024 PDF

Road vehicles-Controller area network (CAN)-Part 1: Data link layer and physical coding sublayer

$60.00 $120.00 -50%
Product Code: ISO 11898-1
Stock In Stock
Edition: 3.
Published: 05/2024
Number of Pages: 90
File Size: 1 file, 7 Bytes

Available Options

Product Description

Véhicules routiers - Gestionnaire de réseau de communication (CAN) - Partie 1: Couche liaison de données et signalisation physique

Introduction: The ISO 11898 series provides requirement specifications for the controller area network (CAN) data link layer and physical layer. It is intended for chip implementers, e.g. this document can be used for CAN protocol controllers and ISO 11898-2 for CAN transceivers. The CAN data link layer models the open systems interconnection (OSI) data link layer; it is internally subdivided into logic link control (LLC) and medium access control (MAC). This document also specifies the physical coding sub-layer (PCS) by means of the attachment unit interface (AUI). The PCS also provides the pulse-with modulation (PWM) encoding to be linked to a CAN SIC XL transceiver, which provides the PWM decoding. The OSI layers above the data link layer (e.g. the network layer) are not specified in the ISO 11898 series of specifications. Figure 1 shows the relationship between the OSI layers and the CAN sub-layers. Key AUI attachment unit interface logic link control MAC medium access control medium dependent interface PCS physical coding sub-layer PMA physical medium attachment PMD physical medium dependent PWM pulse-width modulation Figure 1 — CAN data link and physical sub-layers in relation to the OSI model © ISO 2024 – All rights reserved

Scope: This document specifies the controller area network (CAN) data link layer (DLL) and the physical coding sub-layer (PCS). The CAN DLL features data fields of up to 2048 byte when the CAN extended data field length (XL) frame format is used. This document divides the CAN DLL into the logical link control (LLC) and the medium access control (MAC) sub-layers. The DLL’s service data unit (SDU), which interfaces the LLC and the MAC, is implemented by means of the LLC frame. The LLC frame also features the service data unit type (SDT) and the virtual CAN channel identifier (VCID), which provide higher-layer protocol configuration and identification information. How the higher-layer functions are handled is not specified in this document. There are five implementation options: support of the CAN classic frame format only, not tolerating the CAN flexible data rate (FD) frame format; support of the CAN classic frame format and tolerating the CAN FD frame format; support of the CAN classic frame format and the CAN FD frame format; support of the CAN classic frame format, the CAN FD frame format and the CAN XL frame format; support of the CAN FD frame format for CAN FD light responders (Annex A). NOTE Nodes of the first option can communicate with nodes of the third and fourth option when only the CAN classic frame format is used. Nodes of the first option cannot communicate with nodes of the fifth option: any attempt at communication generates error frames. Therefore, new designs implementing the fourth option can communicate with all other nodes.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 11898-1-2024 PDF

ISO 11898-1-2024 PDF

$60.00 $120.00