Ophthalmic Implants - Intraocular Lenses - Part 2:Optical Properties and Test Methods
Introduction: This document initially addressed monofocal IOLs and now includes the optical requirements and test methods for monofocal, toric, simultaneous vision, and accommodating IOLs. This document generally provides specific test methods and requirements connected to the optical function of intraocular lenses. In some cases, test methods do not have specified requirements, including: — the spectral transmittance test that provides information related to UV transmission and potential exposure situations, e.g. when using laser light sources for diagnosis and treatment; — optical characterization testing that informs potential optical design risks and guides potential clinical investigation design. The specified dioptric power and imaging quality limits result from the analysis of extensive interlaboratory testing of the original spherical monofocal IOLs. Based on these studies, the respective dioptric power repeatability and reproducibility were about 0,5 % and 1 %, respectively, of the dioptric power as described in Reference [1]. Additionally, for IOLs in the 10 D to 30 D range, the respective expected imaging quality repeatability and reproducibility were 0,09 and 0,16 modulation transfer function values as described in Reference [2]. For other non-monofocal IOL designs, manufacturers should utilize model-specific repeatability and reproducibility precision limits to establish reliable final release criteria. During the interlaboratory testing, some problems were encountered with me
Scope: This document specifies requirements and test methods for certain optical properties of intraocular lenses (IOLs) with monofocal, toric, simultaneous vision, and/or accommodative optics. The generic descriptor ‘IOL’ used throughout this document also includes phakic intraocular lenses (PIOL).