Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
Introduction: The primary purpose of ISO 12100 is to provide designers with an overall framework and guidance to enable them to produce machines that are safe for their intended use. It also provides a strategy for standard makers. The concept of safety of machinery considers the ability of a machine to perform its intended function(s) during its lifecycle where risk has been adequately reduced. This standard is the basis for a set of standards which has the following structure: type-A standards (basic safety standards) giving basic concepts, principles for design, and general aspects that can be applied to all machinery; type-B standards (generic safety standards) dealing with one safety aspect or one type of safeguard that can be used across a wide range of machinery: type-B1 standards on particular safety aspects (e.g. safety distances, surface temperature, noise); type-B2 standards on safeguards (e.g. two-hand controls, interlocking devices, pressure sensitive devices, guards); type-C standards (machine safety standards) dealing with detailed safety requirements for a particular machine or group of machines. This standard is a type-A standard. When a type-C standard deviates from one or more provisions dealt with by Part 2 of this standard or by a type-B standard, the type-C standard takes precedence. It is recommended that this standard be incorporated in training courses and manuals to convey basic terminology and general design methods to designers. ISO/IEC Guide 51 has be
Scope: This standard defines basic terminology and methodology used in achieving safety of machinery. The provisions stated in this standard are intended for the designer. This standard does not deal with damage to domestic animals, property or the environment.
Contents:
- Foreword
- Introduction
- Scope