Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
Introduction: The primary purpose of ISO 12100 is to provide designers with an overall framework and guidance to enable them to produce machines that are safe for their intended use. It also provides a strategy for standard makers. The concept of safety of machinery considers the ability of a machine to perform its intended function(s) during its lifecycle where risk has been adequately reduced. This standard is the basis for a set of standards which has the following structure: type-A standards (basic safety standards) giving basic concepts, principles for design, and general aspects that can be applied to all machinery; type-B standards (generic safety standards) dealing with one safety aspect or one type of safeguard that can be used across a wide range of machinery: type-B1 standards on particular safety aspects (e.g. safety distances, surface temperature, noise); type-B2 standards on safeguards (e.g. two-hand controls, interlocking devices, pressure sensitive devices, guards); type-C standards (machine safety standards) dealing with detailed safety requirements for a particular machine or group of machines. This standard is a type-A standard. The subject of numerous clauses or subclauses of this standard is also dealt with, in a more detailed manner, in other type-A or B standards. When a type-C standard deviates from one or more provisions dealt with by Part 2 of this standard or by a type-B standard, the type-C standard takes precedence. It is recommended that this standar
Scope: This standard defines technical principles to help designers in achieving safety in the design of machinery. ISO 12100-2 is intended to be used together with ISO 12100-1 when considering the solution to a specific problem. The two parts of ISO 12100 can be used independently of other documents or as a basis for the preparation of other type-A standards or type-B or -C standards. This standard does not deal with damage to domestic animals, property or the environment.
Contents:
- Foreword
- Introduction
- Scope