ISO 12130-3-2020 PDF

ISO 12130-3-2020 PDF

Plain bearings-Hydrodynamic plain tilting pad thrust bearings under steady-state conditions-Part 3: Guide values for the calculation of tilting pad thrust bearings

$31.50 $63.00 -50%
Product Code: ISO 12130-3
Stock In Stock
Edition: 2.
Published: 02/2020
Number of Pages: 12
File Size: 1 file, 980 Bytes

Available Options

Product Description

Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 3: Guide values for the calculation of tilting pad thrust bearings

Introduction: In order for tilting pad thrust bearings calculated in accordance with ISO 12130-1 to be sufficiently reliable in operation, it is necessary that the calculated operational parameters hmin, TB or T2 and p do not fall below or exceed the guide values hlim, Tlim and plim . For limiting cases at high specific loads and/or high rotational frequencies, more accurate calculations are necessary taking into consideration thermal, elastic, hydrodynamic and/or turbulence effects. The guide values represent limiting values in the tribological system plain bearing unit which are dependent on geometry and technology. These are empirical values which give still sufficient reliability in operation even when subjected to slight disturbing influence as shown in ISO 12130-1:2001, Clause 4. © ISO 2020 – All rights reserved

Scope: This document specifies guide values for the calculation of tilting pad thrust bearings as described in ISO 12130-1. The empirical values given can be modified for specific fields of application. This document is not applicable to heavily loaded tilting pad thrust bearings.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 12130-3-2020 PDF

ISO 12130-3-2020 PDF

$31.50 $63.00