ISO 12176-5-2021 PDF

ISO 12176-5-2021 PDF

Plastics pipes and fittings-Equipment for fusion jointing polyethylene systems-Part 5: Two-dimensional data coding of components and data exchange format for PE piping systems

$145.50 $291.00 -50%
Product Code: ISO 12176-5
Stock In Stock
Edition: 1ST
Published: 05/2021
Number of Pages: 66
File Size: 1 file, 2 Bytes

Available Options

Product Description

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 5: Two-dimensional data coding of components and data exchange format for PE piping systems

Introduction: The use of two-dimensional code is becoming increasingly popular because of the quantity of information that it is possible to group in a small space, and this can provide increased opportunities for manufacturers and customers. There are many benefits for the market, but the scope of this document is not to show all of them. The most important technical advantage of using a two-dimensional code is the possibility to apply a built-in correction level to the coding, so that, even with some scratches or missing parts, the operator can still use all information coded safely. Another important fact, for those that want to use the power of the whole traceability, is that any important information regarding the piping component can be stored in an electronic device, by reading only one code instead of two (ISO 12176-4 and ISO 13950) and thus avoiding overlapping information. This document provides a means for coding all aspects not covered by ISO 12176-4 or ISO 13950, e.g. large diameters, big saddles or other imperial sizes. This document also aims to standardize the transfer of data stored in the memories of electronic units to another electronic equipment (e.g. computer/data base) and to encourage, at any level, the use of the traceability for a further development of the polyethylene piping systems. © ISO 2021 – All rights reserved

Scope: This document specifies an encoding system for data of components, assembly methods and jointing operations for polyethylene (PE) piping systems for gas, water and other industrial applications. These data can be used in a traceability system and/or used to perform the fusion of components by using equipment as specified in ISO 12176-1 and in ISO 12176-2. This encoding system is explained in ISO/IEC 16022, ISO/IEC 18004 and ISO/IEC 24778 which refer to established code types, e.g. QR code. Data to be encoded are: fusion cycle(s), traceability of manufactured products, other manufacturer’s information that can also be given on websites such as voluntary certificates of quality and approvals. This document specifies the export of data (type, format and sequence) from a data retrieval system. Provisions of this document are applicable to polyethylene components conforming to ISO 4427-2, ISO 4427-3, ISO 4437-2, ISO 4437-3, ISO 4437-4 and ISO 15494, and can also be applicable to any other components used in PE systems. ISO 13950 and ISO 12176-4, which partly cover the fields of application of this document, can be used in parallel.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 12176-5-2021 PDF

ISO 12176-5-2021 PDF

$145.50 $291.00