Smoke alarms using scattered light, transmitted light or ionization
Introduction: This document for smoke alarms is drafted on the basis of functions that are to be provided on all smoke alarms covered by this document, and optional functions with requirements which may additionally be provided. It is intended that the options will be used for specific applications, as recommended in application guidelines. Each optional function is included as a separate entity, with its own set of associated requirements, in order to permit smoke alarms covered by this document with different combinations of functions to conform to this document. Additional functions can also be provided, even if not specified in this document. ISO 12239:2021(E) © ISO 2021 – All rights reserved
Scope: This document specifies requirements, test methods, performance criteria and manufacturers' instructions for smoke alarms that operate using scattered light, transmitted light or ionization, and are intended for household or similar residential applications. For the testing of other types of smoke alarms, or smoke alarms working on different principles, this document is recommended only as guidance. Smoke alarms with special characteristics and developed for specific risks are not covered by this document. This document allows, although it does not require, the inclusion within the smoke alarm of facilities for the following: — visual fault condition indication; — extended temperature-range operation; — interconnection with other similar smoke alarms or accessories; — temporary disablement; — alarm silencing; — signal frequency characteristics; — standby power source low condition silence; — smoke alarms with voice; — smoke alarms using radio frequency links; — response to slowly developing fires (drift compensation). Where such facilities are included, this document specifies applicable requirements. This document does not cover devices intended for incorporation in systems using separate control and indicating equipment. Such systems are specified in the ISO 7240 series.