ISO 12251-2026 PDF

ISO 12251-2026 PDF

Diesel engines-Clamp mounted CR fuel injectors-Mounting dimensions

$48.00 $96.00 -50%
Product Code: ISO 12251
Stock In Stock
Edition: 3.
Published: 01/2026
Number of Pages: 20
File Size: 1 file, 570 KB

Available Options

Product Description

Diesel engines — Clamp mounted CR fuel injectors — Mounting dimensions

Introduction: The mainstream of fuel injection system for diesel engine has shifted from P-L-N (pump-line-nozzle) and unit injectors to CR fuel injection system. The injector for CR fuel injection system has most of the functions for delicately injecting high pressure fuel inside the injector, and since they are easily affected by distortion or deformation of the injector body, it is necessary to pay close attention to the installation on the cylinder head. This document provides design engineers with standard dimensions for installing the CR injector on the cylinder head. © ISO 2026 – All rights reserved

Scope: This document specifies dimensional requirements for clamp mounted CR fuel injectors and their corresponding cylinder head features in diesel engines. According to the injector nozzle capnut, the clamp mounted CR fuel injectors can be divided into two types: a) Type A, where the nozzle capnut is straight (see Figure 4); b) Type B, where the nozzle capnut is stepped (see Figure 5). Each clamp mounted CR fuel injector type is subdivided by a series of different sizes. NOTE This differentiation corresponds to the relationship between the two guide diameters of the clamp mounted CR fuel injectors.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 12251-2026 PDF

ISO 12251-2026 PDF

$48.00 $96.00