Graphic technology - Determination of tack of paste inks and vehicles by a rotary tackmeter
Introduction: On the market, a number of three-roller tackmeters are available that differ in design features such as roller weight, geometry and composition of the distribution system. Instruments of different types do not give the same apparent tack readings. Instruments of the same type will only give apparent tack readings within tolerance, provided that they are maintained and calibrated properly and in the same manner. Tack is a property indicative of internal cohesion of fluids and the adhesion to surfaces. It varies with measuring conditions, primarily separation velocity, splitting area, force applied, film thickness and temperature. Tack also varies with changes in other rheological properties of the fluid as a result of time and interactions with the separating surfaces. This document refers to tack measurement of paste inks and their vehicles only, not involving fountain solution. During offset printing, the ink on a press may contain fountain solution and form an emulsion. The amount of fountain solution within the ink partly depends on the composition of both the ink and the fountain solution, the forces present, and the relative position of the ink in the roller train. The tack of an emulsion partly depends on the composition of both the ink and the fountain solution and the ratio of ink and fountain solution. The tack value is a well-established criterion for assessing a paste ink or vehicle, although the parameter tack is poorly defined. The tack cannot be regarded as a ma
Scope: This document specifies the test procedure for determining the tack value of neat paste inks and vehicles which have low volatility and are unreactive under normal room conditions during the timespan required for testing. This document contains a basic description of Inkometer®1) and Inkomat®2) (Geometry A) and TackOscope®3) and TackTester®4) (Geometry B).