Oil and gas industries including lower carbon energy — Pipeline transportation systems — Requirements and guidance for pipeline life extension assessment
Introduction: The purpose of this document is to detail a suitable approach to pipeline life extension assessment that can be applied by operators (or parties acting on their behalf) across the industry. It is concerned with the proof of structural integrity of the pipeline system for the justification of extended operation. Integrity management is not covered in detail. However, the interface between a pipeline integrity management system (PIMS) and the life extension process is considered because: — a PIMS, where present, forms an integral part of the integrity assessment of the pipeline system; — a PIMS of some form is required for operation in extended life. Factors affecting the future operability of the system but not the structural integrity, such as deterioration of topsides equipment or the loss of a control umbilical, are flagged as requiring assessment but are not addressed in full in this document. NOTE Further guidance on the lifetime extension of subsea systems, including umbilicals and topsides equipment, is provided in NORSOK U-009. Whilst this document is aimed primarily at the pipeline operators, it can also be of interest to other stakeholders such as: — regulators approving the life extension application; — members of the public affected by the life extension application, such as other users of maritime waters, landowners and developers. Considering this, an overview of the life extension process and the key principles involved is given in Clause 5. The remainder of the
Scope: This document presents assessment requirements and associated guidance for extending the service life of a pipeline system, as defined in ISO 13623, beyond its specified design life. It applies to both onshore and offshore rigid metallic pipelines and risers [including steel catenary risers (SCRs)]. This document is not directly applicable to the following: — flexible pipelines; — pipelines constructed from other materials, such as glass reinforced plastics or polymers; — umbilicals (control or chemical conveyance service, or both); — topsides equipment and piping (outside of pipeline system limits defined in accordance with local regulatory requirements); — pipeline protection and support structures and components. However, the assessment process defined herein can be applied in the lifetime extension assessment of the above at the discretion of the user. This document addresses life extension, which is a change to the original design premise. It is also applicable to other changes to the design premise, such as maximum allowable operating pressure (MAOP) re-ratings or a change to the conveyed fluids, at the discretion of the user.