Houille - Détermination de l'abrasivité
Introduction: The abrasiveness of coal is recognized as a factor in coal operations, from mining to utilization, requiring a standard method of measurement and evaluation, as some coals are more abrasive than others. The interaction between coal and conveying, storage, and crushing equipment results in component wear. In particular, higher contact pressures in some coal pulverizers result in significant wear. For the ranking or relative comparison of the abrasiveness of coals, a test was developed[1] which standardized the following equipment variables: a) test equipment dimensions and tolerances; b) speed of rotation of wearing components; c) properties of the wearing components; d) mass of the test portion; e) top particle size of the test portion; f) duration of the test. The abrasiveness of coal is generally a function of two factors: the physical properties of the coal, in particular, moisture content, mineral content, and mineral characteristics[1][2][3][4][5][6]; the mechanics of the operations to which the coal is subjected. NOTE Moisture contents over 10 % in the test sample after air-drying and laboratory equilibration might give anomalous results; the reason for this has not been established. Wear on coal-pulverizing elements in industrial mills is influenced by the physical characteristics of the coal and its mineral constituents, the mechanical characteristics of the mill, including the milling pressures, alloy material properties and coal feed flow, and the operation of the m