Lubrifiants, huiles industrielles et produits connexes (classe L) - Famille X (Graisses) - Spécifications
Introduction: According to Reference [25], grease is a lubricant which has been thickened in order that it remain in contact with the moving surfaces and not leak out under gravity or centrifugal action, or be squeezed out under pressure. Additives may be included to bring special properties like anti-oxidants, rust and corrosion inhibitors, anti-wear and extreme pressure additives, solid lubricants. Greases are used to keep the lubricant in place in the lubricated organs or mechanisms. The advantages of greases are the reduction of the construction and maintenance costs, the simplicity of the sealing systems, and the possibility for life lubrication. One of the drawbacks of greases versus liquid lubricants is that they do not easily remove heat and cannot be filtered. So greases limit the operating speed of some mechanisms. Due to the variety of base oils and thickeners, there is a wide variety of greases. The selection of the liquid lubricant and the thickener depends on the properties required. The low temperature properties are governed by the liquid lubricant characteristics, mainly its flow properties at low temperature. The high temperature properties are linked to the type of thickener and to the heat stability of the liquid lubricant. Greases can be formulated to meet environmental acceptability requirements (toxicity and biodegradability). The purpose of this document is to provide guidance to suppliers and end users of greases and to manufacturers of grease-lubricated equipment.
Scope: This document establishes the specifications relative to family X (greases) for lubricants, industrial oils and related products of Class L (see ISO 6743-9). Those greases are mainly used for the lubrication of anti-friction bearings fitted on machines, vehicles, etc. This document is written in a general form so that its application can accommodate various climatic conditions throughout the world. It also stipulates the requirements for the lubricating grease at the time of the delivery. NOTE 1 This document is intended to be read in conjunction with ISO 6743-9. NOTE 2 Greases for gear applications are specified in ISO 12925-3.