ISO 12925-1-2024 PDF

ISO 12925-1-2024 PDF

Lubricants, industrial oils and related products (class L)-Family C (gears)-Part 1: Specifications for lubricants for enclosed gear systems

$60.00 $120.00 -50%
Product Code: ISO 12925-1
Stock In Stock
Edition: 3.
Published: 05/2024
Number of Pages: 44
File Size: 1 file, 2 Bytes

Available Options

Product Description

Lubrifiants, huiles industrielles et produits connexes (classe L) — Famille C (engrenages) — Partie 1: Spécifications des lubrifiants pour systèmes d'engrenages sous carter

Introduction: Lubricants for gear systems are used in diverse types of gear designs, ranging from simple parallel spur gears to bevel gears (spur, skew or spiral), worm gears and hypoid gears. Industrial gear systems, which are either of open type or enclosed type, vary in size from small enclosed systems used in machine tools to very large systems used in mining, steel mills and cement plants. Lubricants for these applications vary in composition from refined straight mineral oils to more complex blends, based on mineral oils, synthetic oils (e.g. poly α-olefins, esters, poly-glycols), to vegetable oils and derivatives and friction-modifying additives and/or extreme-pressure. ISO 3448 viscosity grades vary depending on the type of application. They can range from the low viscosity ISO VG 32 to high viscosity ISO VG 1 500. These grades can vary even more for the very low velocities and very high loads. In exceptional cases, viscosity grades may be even higher. Temperature conditions to which the gear systems are exposed also vary considerably, not only due to the ambient conditions of operation, but also depending on the sliding between the gear teeth, on the size of the casings, on the presence on the circulating systems of heat exchangers, on the vicinity of heat sources as in the cement industry or in the steel industry. Greases may also be used for the splash lubrication of enclosed gears or for the application on open gear teeth. This document covers the lubricants applied in enclosed

Scope: This document establishes the specifications relative to family C (gears) for lubricants, industrial oils and related products of class L (see ISO 6743-6). This document deals only with lubricants for enclosed gear systems. Lubricants for open gears and greases for gears (enclosed or open) are covered by the other parts of the ISO 12925 series (i.e. ISO 12925-2 and ISO 12925-3). This document is intended to be read in conjunction with ISO 6743-6. The following categories specified in ISO 6743-6 are covered by this document: CKB, CKC, CKD, CKE, CKSMP, CKTG, CKES, CKPG, CKPR, CSPG, CSPR, CTPG and CTPR. Detailed information about the different types of gear, and lubricants, and their selection for gearbox design and service conditions can be found in ISO/TR 18792.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 12925-1-2024 PDF

ISO 12925-1-2024 PDF

$60.00 $120.00