Geotextiles and geotextile-related products — Determination of water flow capacity in their plane — Part 2: Performance test
Introduction: The results obtained under this test procedure do not compare with those obtained under ISO 12958-1, even if some of the test conditions are similar. Many geosynthetic products can creep under constant load, i.e. see their thickness diminish over time, which can influence their in-plane water flow capacity. Although a seating time typically greater than the one used in ISO 12958-1 is used, this test does not cover all creep-related issues for drainage geocomposites. Assessment of long-term flow capacity involves further considerations. This procedure can be useful to assess the effect of geotextile intrusion into the drainage core on the transmissivity of a drainage product, using soil from a particular project as a stress-distribution layer in contact with the geotextile. Other test methods can be more suitable for the characterization of particular drainage products, such as ISO 18325 for prefabricated vertical drains. It is the responsibility of the user to assess the limit of this test procedure and select the appropriate test method, test conditions or both that adequately reflect the particular needs for their project. In this test method, the flow capacity of the product in a given direction is evaluated considering soil confinement, service load and service hydraulic gradient, as well as primary creep. However: — For some products and designs, ensuring the product performance may require controlling the flow capacity of the product in both directions, for example for
Scope: This document specifies a method for determining the constant-head water flow capacity within the plane of a geotextile or geotextile-related product, using boundary materials and test conditions of interest. A standard series of test conditions are proposed, involving soil confinement, low hydraulic gradients, seating times and an array of normal loads.