ISO 12999-1-2020 PDF

ISO 12999-1-2020 PDF

Acoustics-Determination and application of measurement uncertainties in building acoustics-Part 1: Sound insulation

$96.50 $193.00 -50%
Product Code: ISO 12999-1
Stock In Stock
Edition: 2ND
Published: 04/2020
Number of Pages: 28
File Size: 1 file, 1 Byte

Available Options

Product Description

Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 1: Sound insulation

Introduction: An assessment of uncertainties that is comprehensible and close to reality is indispensable for many questions in building acoustics. Whether a requirement is met, a laboratory delivers correct results or the acoustic properties of a product are better than the same properties of some other product can be decided only by adequately assessing the uncertainties associated with the quantities under consideration. Uncertainties should preferably be determined following the principles of ISO/IEC Guide 98-3. This Guide specifies a detailed procedure for the uncertainty evaluation that is based upon a complete mathematical model of the measurement procedure. At the current knowledge, it seems to be impossible to formulate these models for the different quantities in building acoustics. Therefore, only the principles of such an uncertainty assessment are explained. To come to uncertainties all the same, the concept of reproducibility and repeatability is incorporated which is the traditional approach for uncertainty determination in building acoustics. This concept offers the possibility to state the uncertainty of a method and of measurements carried out according to the method, based on the results of inter-laboratory measurements. NOTE Whenever applicable, the terms and definitions used in this document are equivalent to those given in ISO 5725-1[2], in ISO/IEC Guide 98-3[7] and in ISO/IEC Guide 99[8]. © ISO 2020 – All rights reserved

Scope: This document specifies procedures for assessing the measurement uncertainty of sound insulation in building acoustics. It provides for — a detailed uncertainty assessment; — a determination of uncertainties by inter-laboratory tests; — an application of uncertainties. Furthermore, typical uncertainties are given for quantities determined according to ISO 10140 (all parts), ISO 16283 (all parts) and ISO 717 (all parts).

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 12999-1-2020 PDF

ISO 12999-1-2020 PDF

$96.50 $193.00