ISO 13041-1-2020 PDF

ISO 13041-1-2020 PDF

Test conditions for numerically controlled turning machines and turning centres-Part 1: Geometric tests for machines with horizontal workholding spindle(s)

$129.00 $258.00 -50%
Product Code: ISO 13041-1
Stock In Stock
Edition: 2ND
Published: 03/2020
Number of Pages: 54
File Size: 1 file, 1 Byte

Available Options

Product Description

Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with horizontal workholding spindle(s)

Introduction: The objective of the ISO 13041 series is to provide information as wide and comprehensive as possible on geometric, positional, contouring, thermal and machining tests which can be carried out for comparison, acceptance, maintenance or any other purpose. The ISO 13041 series specifies, with reference to the ISO 230-1 and ISO 230-7, tests for turning centres and numerically controlled turning machines with/without tailstocks standing alone or integrated in flexible manufacturing systems. The ISO 13041 series also establishes the tolerances or maximum acceptable values for the test results corresponding to general-purpose and normal-accuracy turning centres and numerically controlled turning machines. © ISO 2020 – All rights reserved

Scope: This document specifies, with reference to ISO 230-1, the geometric tests on normal accuracy numerically controlled (NC) turning machines and turning centres with horizontal work spindles as defined in 3.1 and 3.2. It also specifies the applicable tolerances corresponding to the above-mentioned tests. Where applicable, this document also applies to horizontal spindle turret and single spindle automatic lathes. This document explains different concepts or configurations and common features of NC turning machines and turning centres. It also provides a terminology and designation of controlled axes. This document deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick slip motion of components) nor to machine characteristics (e.g. speeds, feeds) as such are checks generally carried out before testing the accuracy.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13041-1-2020 PDF

ISO 13041-1-2020 PDF

$129.00 $258.00