Ships and marine technology - Risk assessment on anti-fouling systems on ships - Part 3: Human health risk assessment method of biocidally active substances used in anti-fouling paints on ships during the application and removal processes
Introduction: The attachment of fouling organisms, such as barnacles and algae, on the submerged parts of a ship’s hull increases the propulsive resistance of the hull against water, leading to increased fuel consumption. In addition, this may also result in accidental introduction of non-indigenous species to a foreign marine environment, which may possibly cause significant and harmful impact on the local environment. In order to prevent such circumstances, an anti-fouling system that employs biocidally active substances (e.g. anti-fouling paint) to prevent attachment of fouling organisms can be applied onto the hull of the ship. The harmful effects of organotin compounds used in the maritime industry as biocides against marine organisms have been of global concern on human health. To prevent the continued use of these compounds, the International Convention on the Control of Harmful Anti-fouling Systems on Ships (the AFS Convention) was adopted at the International Maritime Organization (IMO) diplomatic conference held in London in October 2001 and entered into force in September 2008. The Convention envisages handling various harmful anti-fouling systems within its framework and lays out a process by which anti-fouling systems can be risk assessed. Annexes 2 and 3 of the Convention include the list of information needed to determine whether an anti-fouling system is harmful to the environment and should be restricted from use on ships; however, a marine environmental risk assessment me
Scope: This part of ISO 13073 specifies a method of human health risk assessment that enables the evaluation of anti-fouling paint application and removal in order to determine if the product can be used safely where users are at risk of being exposed to biocidally active substances contained within anti-fouling paints. This can be used for a risk assessment to determine the impact(s), if any, on professional or non- professional operators. This part of ISO 13073 does not specify a specific test method for evaluation of hazard and toxicity or recommend usage restrictions of certain substances. NOTE 1 This part of ISO 13073 is a “minimum” method, i.e. additional regulations or assessments based on national needs can be warranted. NOTE 2 While the approach prescribed is a tiered system, studies required in higher tiers can be undertaken in lieu of equivalent lower tier studies. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. NOTE Some of the definitions for environmental risk assessment provided in ISO 13073-1 and ISO 13073-2 may be different from those of this part of ISO 13073. 2.1 adverse effect change in morphology, physiology, growth, development or lifespan of an organism which results in impairment of its functional capacity or impairment of its capacity to compensate for additional stress or increased susceptibility to the harmful effects of other environmental influences Note 1 to entry: This definition is given in reference WHO/IPCS, 1994 [63]. 2.2 anti-fouling paint type of anti-fouling system supplied as a form of paint typically consisting of a matrix polymer, pigment(s) and solvent(s) 2.3 anti-fouling system coating, paint, surface treatment, surface, or device that is used on a ship to control or prevent attachment of unwanted organisms Note 1 to entry: Systems of control utilizing only physical means are not included within this International Standard. INTERNATIONAL STANDARD ISO 13073-3:2016(E) © ISO 2016 – All rights reserved ISO 13073-3:2016(E) 2.4 biocidally active substance substance having general or specific action such as mortality, growth inhibition, or repellence, on unwanted fouling organis