ISO 13083-2015 PDF

ISO 13083-2015 PDF

Surface chemical analysis - Scanning probe microscopy - Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes

$71.50 $143.00 -50%
Product Code: ISO 13083
Stock In Stock
Edition: 1ST
Published: 08/15/2015
Number of Pages: 22
File Size: 1 file, 1 Byte

Available Options

Product Description

Surface chemical analysis - Scanning probe microscopy - Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes

Introduction: Electrical scanning probe microscopy (ESPM) is a branch of scanning probe microscopy (SPM) with the capability of electrical imaging at nanometre spatial resolution. ESPM includes electrostatic force microscopy (EFM), scanning capacitance microscopy (SCM), scanning spreading resistance microscopy (SSRM), etc. Because ESPM can observe electrical or electronic properties with molecule-scale resolution, it is applied to many fields such as semiconductors, displays, etc. However, there has been no standard measurement method for the spatial resolution. In this International Standard, standardized procedures to determine the spatial (lateral) resolution of SSRM and SCM, which are widely used to image the distribution of carrier and other electrical properties in semiconductor devices, are provided with the use of suitable reference materials. This International Standard uses the sharp-edge method to measure the lateral resolution of ESPM in a similar manner to that already used in measuring the resolution in micro-beam spectroscopy and in depth-profiling measurements with Auger electron spectroscopy and X-ray photoelectron spectroscopy (refer to ISO 18516). © ISO 2015 – All rights reserved

Scope: This International Standard describes a method for measuring the spatial (lateral) resolution of scanning capacitance microscopes (SCMs) or scanning spreading resistance microscopes (SSRMs), which are widely used in imaging the distribution of carriers and other electrical properties in semiconductor devices. The method involves the use of a sharp-edged artefact.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13083-2015 PDF

ISO 13083-2015 PDF

$71.50 $143.00