ISO 13137-2022 PDF

ISO 13137-2022 PDF

Workplace atmospheres-Pumps for personal sampling of chemical and biological agents-Requirements and test methods

$113.50 $227.00 -50%
Product Code: ISO 13137
Stock In Stock
Edition: 2.
Published: 08/2022
Number of Pages: 36
File Size: 1 file, 2 Bytes

Available Options

Product Description

Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods

Introduction: Many different methods are used to determine the concentration of chemical and biological agents in workplace air. Many of these methods involve the use of a pump and sampler connected by a flexible tube. Air is drawn through the sampler and chemical and biological agents are trapped, e.g. on a filter, sorbent tube or long-term detector tube, or in a gas washing bottle. In personal sampling, the pump and sampler are attached to the worker to collect chemical and biological agents in the breathing zone. The volume of air drawn by the pump during the sampling period is one of the quantities in the calculation of the concentration of the chemical and biological agents in air. Therefore, the volume of air sampled should be determined accurately and, in order to facilitate this, the flow rate should be maintained within acceptable limits throughout the sampling period. For particle size selective sampling, the short-term fluctuation of the flow rate should also be maintained within acceptable limits in order to ensure that the sampler exhibits the required collection characteristics. ISO 20581[1] specifies general performance criteria for methods for measuring the concentration of chemical and biological agents in workplace air. These performance criteria include maximum values of expanded uncertainty that are not to be exceeded under prescribed laboratory conditions. In addition, the performance criteria should also be met under a wider variety of environmental influences, repres

Scope: This document specifies performance requirements for battery powered pumps used for personal sampling of chemical and biological agents in workplace air. It also specifies test methods in order to determine the performance characteristics of such pumps under prescribed laboratory conditions. This document is applicable to battery powered pumps having a nominal volumetric flow rate above 10 ml ⋅ min−1, as used with combinations of sampler and collection substrate for sampling of gases, vapours, dusts, fumes, mists and fibres. This document is primarily intended for flow-controlled pumps.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13137-2022 PDF

ISO 13137-2022 PDF

$113.50 $227.00