ISO 13161-2020 PDF

ISO 13161-2020 PDF

Water quality-Polonium 210-Test method using alpha spectrometry

$96.50 $193.00 -50%
Product Code: ISO 13161
Stock In Stock
Edition: 2ND
Published: 07/2020
Number of Pages: 26
File Size: 1 file, 1 Byte

Available Options

Product Description

Water quality — Polonium 210 — Test method using alpha spectrometry

Introduction: Radioactivity from several naturally-occurring and anthropogenic sources is present throughout the environment. Thus, water bodies (e.g. surface waters, ground waters, sea waters) can contain radionuclides of natural, human-made, or both origins: — Natural radionuclides, including 40K, 3H, 14C, and those originating from the thorium and uranium decay series, in particular 226Ra, 228Ra, 234U, 238U, and 210Pb, can be found in water for natural reasons (e.g. desorption from the soil and wash off by rain water) or can be released from technological processes involving naturally occurring radioactive materials (e.g. the mining and processing of mineral sands or phosphate fertilizer production and use); — Human-made radionuclides, such as transuranium elements (americium, plutonium, neptunium, curium), 3H, 14C, 90Sr, and gamma emitting radionuclides can also be found in natural waters. Small quantities of these radionuclides are discharged from nuclear fuel cycle facilities into the environment as the result of authorized routine releases. Some of these radionuclides used for medical and industrial applications are also released into the environment after use. Anthropogenic radionuclides are also found in waters as a result of past fallout contaminations resulting from the explosion in the atmosphere of nuclear devices and accidents such as those that occurred in Chernobyl and Fukushima. Radionuclide activity concentration in water bodies can vary according to local geological char

Scope: This document specifies a method for the measurement of 210Po in all types of waters by alpha spectrometry. The method is applicable to test samples of supply/drinking water, rainwater, surface and ground water, marine water, as well as cooling water, industrial water, domestic, and industrial wastewater after proper sampling and handling, and test sample preparation. Filtration of the test sample may be required. The detection limit depends on the sample volume, the instrument used, the counting time, the background count rate, the detection efficiency and the chemical yield. The method described in this document, using currently available alpha spectrometry apparatus, has a detection limit of approximately 5 mBq l−1, which is lower than the WHO criteria for safe consumption of drinking water (100 mBq l−1). This value can be achieved with a counting time of 24 h for a sample volume of 500 ml. The method described in this document is also applicable in an emergency situation. The analysis of 210Po adsorbed to suspended matter in the sample is not covered by this method. If suspended material has to be removed or analysed, filtration using a 0,45 μm filter is recommended. The analysis of the insoluble fraction requires a mineralization step that is not covered by this document [13]. In this case, the measurement is made on the different phases obtained. The final activity is the sum of all the measured activity concentrations. It is the user’s responsibility to ensure the validity of this test method for the water samples tested.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13161-2020 PDF

ISO 13161-2020 PDF

$96.50 $193.00