ISO 13165-4-2025 PDF

ISO 13165-4-2025 PDF

Water quality-Radium-226-Part 4: Test method using alpha spectrometry

$113.50 $227.00 -50%
Product Code: ISO 13165-4
Stock In Stock
Edition: 1.
Published: 08/2025
Number of Pages: 38
File Size: 1 file, 2 Bytes

Available Options

Product Description

Water quality — Radium-226 — Part 4: Test method using alpha spectrometry

Introduction: Radionuclides are present throughout the environment; thus, water bodies (e.g. surface waters, ground waters, sea waters) contain radionuclides, which can be of either natural or anthropogenic origin. — Naturally-occurring radionuclides, including 3H, 14C, 40K and those originating from the thorium and uranium decay series, in particular 210Pb, 210Po, 222Rn, 226Ra, 228Ra, 227Ac, 232Th, 231Pa, 234U and 238U, can be found in water bodies due to either natural processes (e.g. desorption from the soil and runoff by rain water) or released from technological processes involving naturally occurring radioactive materials (e.g. mining, mineral processing, oil, gas and coal production, water treatment, and the production and use of phosphate fertilisers). — Anthropogenic radionuclides such as 55Fe, 59Ni, 63Ni, 90Sr, 99Tc, transuranic elements (e.g. Np, Pu, Am, Cm), and some gamma emitting radionuclides, such as 60Co and 137Cs, can also be found in natural waters. Small quantities of anthropogenic radionuclides can be discharged from nuclear facilities to the environment as a result of authorized routine releases. The radionuclides present in liquid effluents are usually controlled before being discharged to the environment[1] and water bodies. Anthropogenic radionuclides used for medical and industrial applications can be released to the environment after use. Anthropogenic radionuclides are also found in waters due to contamination from fallout resulting from above-ground nuclear det

Scope: This document specifies methods to determine 226Ra by alpha spectrometry in supply water, drinking water, rainwater, surface and ground water, marine water, as well as cooling water, industrial water, domestic, and industrial wastewater after proper sampling, handling and test sample preparation. The detection limit depends on the sample volume, the instrument used, the background count rate, the detection efficiency, the counting time and the chemical yield. The detection limit of the methods described in this document, using currently available alpha spectrometry apparatus, is equal to or lesser than 3 mBq·l−1 (or mBq·kg−1), which is lower than the WHO criteria for safe consumption of drinking water (1 Bq·l−1)[4]. This value can typically be achieved with a counting time of 48 h for a test sample volume of 40 ml. The method described in this document is applicable in the event of an emergency situation. Filtration of the test sample is necessary for the methods described in this document if suspended solids are present. The analysis of 226Ra adsorbed to suspended matter is not covered by this method, because it requires a mineralization step. In this case, the measurement is made on the different phases obtained. The final activity is the sum of all the measured activity concentrations. It is the user’s responsibility to ensure the validity of this test method for the water samples tested.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13165-4-2025 PDF

ISO 13165-4-2025 PDF

$113.50 $227.00