ISO 13322-2-2021 PDF

ISO 13322-2-2021 PDF

Particle size analysis-Image analysis methods-Part 2: Dynamic image analysis methods

$145.50 $291.00 -50%
Product Code: ISO 13322-2
Stock In Stock
Edition: 2ND
Published: 12/2021
Number of Pages: 60
File Size: 1 file, 3 Bytes

Available Options

Product Description

Particle size analysis — Image analysis methods — Part 2: Dynamic image analysis methods

Introduction: The ISO 13322 series is applicable to the analysis of images for the purpose of determining particle size distributions. The purpose of this document is to provide guidance for measuring and describing particle size distribution, using image analysis methods where particles are in motion. This entails using techniques for dispersing particles in liquid or gas, taking in-focus, still images of them while the particles are moving and subsequently analysing the images. This methodology is called dynamic image analysis. There are several image capture methods. Some typical methods are described in this document. ISO 13322-1 on static image analysis methods assumes that an adequate image has already been captured and concentrates upon the analysis of these images. ISO 13322-2:2021(E)  © ISO 2021 – All rights reserved

Scope: This document describes a method to transfer the images from particles having relative motion to binary images within practical systems, in which the particles in the images are individually separated. Images of moving particles are created by an optical image capture device. Effects of particle movement on the images are either minimized by the instrumentation or corrected by software procedures. This method is applicable to the particle images that are clearly distinguishable from static background. Further processing of the binary image, which is then considered as static, is described in ISO 13322-1. A dynamic image analysis system is capable of measuring a higher number of particles compared to static image analysis systems. This document provides guidance on instrument qualification for particle size distribution measurements by using particulate reference materials. This document addresses the relative movement of the particles with respect to each other, the effect of particle movement on the image (motion blur), the movement and position along the optical axis (depth of field), and the orientation of the particles with respect to the camera.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13322-2-2021 PDF

ISO 13322-2-2021 PDF

$145.50 $291.00