ISO 13373-10-2024 PDF

ISO 13373-10-2024 PDF

Condition monitoring and diagnostics of machines-Vibration condition monitoring-Part 10: Diagnostic techniques for electrical generators with fluid-film bearings

$96.50 $193.00 -50%
Product Code: ISO 13373-10
Stock In Stock
Edition: 1.
Published: 06/2024
Number of Pages: 28
File Size: 1 file, 2 Bytes

Available Options

Product Description

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 10: Diagnostic techniques for electrical generators with fluid-film bearings

Introduction: This document provides guidelines for the procedures to be considered when carrying out vibration diagnostics of electrical generators with fluid-film bearings. It is intended to be used by vibration practitioners, engineers and technicians and it provides them with useful diagnostic tools which include the use of flowcharts and fault tables. ISO 20816-2 sets out the criteria for monitoring the vibration of gas turbines, steam turbines and generators in excess of 40 MW and establishes provisions for evaluating the severity of the in-situ, broad-band vibration. ISO 13373-1 presents the basic procedures for analysing narrow-band vibration signals. It includes the types of transducers to be used, their ranges, their recommended mounting locations on various types of machines, on-line and periodic vibration monitoring systems and potential machinery problems. ISO 13373-2 includes descriptions of the signal conditioning equipment that is required, the time and frequency domain techniques that can be used and the waveforms and signatures that represent the most common machinery operating phenomena or faults encountered when performing vibration signature analysis. ISO 13373-3 describes some procedures to determine the causes of vibration problems common to all types of rotating machines. It includes descriptions of systematic approaches that can be used to characterize vibration effects, the diagnostic tools available, which tools are needed for particular applications and recommen

Scope: This document gives guidelines and requirements for the procedures to be followed when carrying out vibration diagnostics of 2‑ and 4‑pole electrical generators of cylindrical pole design with fluid-film bearings. This document does not apply to salient pole generators. This document establishes a practical step-by-step vibration-based approach to fault diagnosis. The requirements of this document should be considered together with those in ISO 13373-4.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13373-10-2024 PDF

ISO 13373-10-2024 PDF

$96.50 $193.00