ISO 13373-4-2021 PDF

ISO 13373-4-2021 PDF

Condition monitoring and diagnostics of machines-Vibration condition monitoring-Part 4: Diagnostic techniques for gas and steam turbines with fluid-film bearings

$96.50 $193.00 -50%
Product Code: ISO 13373-4
Stock In Stock
Edition: 1ST
Published: 11/2021
Number of Pages: 30
File Size: 1 file, 1 Byte

Available Options

Product Description

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 4: Diagnostic techniques for gas and steam turbines with fluid-film bearings

Introduction: This document provides guidelines for the procedures to be considered when carrying out vibration diagnostics of gas turbines and steam turbines on fluid-film bearings. It is intended to be used by vibration practitioners, engineers and technicians and it provides them with useful diagnostic tools. These tools include the use of diagnostic flowcharts, process tables, fault tables and symptom tables. The material contained in this document presents the most basic, logical, and intelligent steps that should be taken when diagnosing problems associated with these particular types of machines. The ISO 20816 series of standards contains acceptable vibration magnitudes and zones for various types and sizes of machines, ranging from new and well-running machines to machines that are in danger of failing. ISO 13373-1 presents the basic procedures for vibration narrow-band signal analysis. It includes the types of transducers used, their ranges and their recommended locations on various types of machines, on-line and periodic vibration monitoring systems, and potential machinery problems. ISO 13373-2 includes descriptions of the signal conditioning equipment that is required; time and frequency domain techniques; and the waveforms and signatures that represent the most common machinery operating phenomena or machinery faults that are encountered when performing vibration signature analysis. ISO 13373-3 provides some procedures to determine the causes of vibration problems common to al

Scope: This document sets out guidelines for the specific procedures to be considered when carrying out vibration diagnostics of various types of gas and steam turbines with fluid-film bearings. This document is intended to be used by condition monitoring practitioners, engineers and technicians and provides a practical step-by-step vibration-based approach to fault diagnosis. In addition, it gives examples for a range of machine and component types and their associated fault symptoms. The approach given in this document is based on established good practice, put together by experienced users, although it is acknowledged that other approaches can exist. Recommended actions for a particular diagnosis depend on individual circumstances, the degree of confidence in the fault diagnosis (e.g. has the same diagnosis been made correctly before for this machine), the experience of the practitioner, the fault type and severity as well as on safety and commercial considerations. It is neither possible nor the aim of this document to recommend actions for all circumstances.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13373-4-2021 PDF

ISO 13373-4-2021 PDF

$96.50 $193.00