ISO 13405-1-2015 PDF

ISO 13405-1-2015 PDF

Prosthetics and orthotics - Classification and description of prosthetic components - Part 1: Classification of prosthetic components

$60.00 $120.00 -50%
Product Code: ISO 13405-1
Stock In Stock
Edition: 2.
Published: 01/15/2015
Number of Pages: 10
File Size: 1 file, 179 Bytes

Available Options

Product Description

Prosthetics and Orthotics - Classification and Description of Prosthetic Components - Part 1: Classification of Prosthetic Components

Introduction: This part of ISO 13405 was the first internationally accepted standard method of classifying the components of prostheses. It is designed to permit the users to classify systematically each component which is incorporated in a finished prosthesis. This part of 13405 is envisaged as being suitable for use by both manufacturers producing literature describing their products and practitioners who are reporting on the components used in the treatment of persons requiring prosthesis. © ISO 2015 – All rights reserved

Scope: This part of ISO 13405 specifies a means of classifying the components of limb prostheses and their construction. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 axial stabilization attribute of interface components which relates to the transmission of longitudinal (proximally directed) forces from the prosthesis to the body 2.2 transverse stabilization attribute of interface components which relates to the transmission of transversely directed forces between the prosthesis and the body Note 1 to entry: Three forms of stabilization are required: anteroposterior, mediolateral, and rotational. 2.3 suspension attribute of interface components concerned with the retention of the prosthesis on the body, i.e. the transmission of longitudinal (distally directed) forces from the prosthesis to the body 2.4 adjustable component prosthetic component whose features can be changed before use by the manufacturer, prosthetist, or user 2.5 adaptable component prosthetic component whose features can be changed by the user to make it suitable for different situations 2.6 auto-adaptive component prosthetic component whose features change automatically in response to varying situations 2.7 liner removable lining worn between the stump and the inner surface of the socket Note 1 to entry: It is used to modify the distribution of the forces associated with axial and transverse stabilization and it can additionally form a part of the prosthetic suspensory system. INTERNATIONAL STANDARD ISO 13405-1:2015(E) © ISO 2015 – All rights reserved

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13405-1-2015 PDF

ISO 13405-1-2015 PDF

$60.00 $120.00