Characterization of pavement texture by use of surface profiles — Part 5: Determination of megatexture
Introduction: Pavement surface texture largely influences factors such as noise emission caused by tyre/road interaction (see Reference [1]), tyre/pavement friction (see Reference [2]), and comfort, as well as rolling resistance (see Reference [3]) and wear of tyres. Reliable methods of measuring and characterizing texture are therefore essential. Texture is subdivided into micro-, macro- and megatexture according to ISO 13473-2. A method for measurement and calculation of a macrotexture indicator based on a profile measurement is specified in ISO 13473-1[4]. A procedure for measuring macrotexture by the volumetric patch method is described in EN 13036-1[5]. Currently, no reliable and practical method of measuring pavement microtexture in situ is available. This document aims to provide means of measuring and calculating a megatexture indicator useful for pavement surface characterization. Megatexture is an important texture range lying between macrotexture and unevenness. This type of texture has wavelengths of the same order of magnitude as a tyre/road interface and is often a result of potholes or ‘washboarding’. Some common types of singularities, such as a single depressed (e.g. a pothole) or protruding (e.g. caused by tree roots) spot on the pavement, will also show up in a texture profile spectrum as megatexture. Although some pavements, such as paving stones, possess an intrinsic megatexture, it is usually an unwanted characteristic resulting from defects in the surface. Megatextur
Scope: This document specifies a procedure for determining the magnitude of pavement surface megatexture by measuring the surface profile and calculating a megatexture descriptor from this profile. The technique is designed to give meaningful and accurate measurements and descriptions of pavement megatexture for various purposes, such as for the prediction of the acoustic quality of the pavement or the assessment of the rolling resistance. Since there is an overlap between megatexture and the surrounding ranges, megatexture descriptors unavoidably have a certain correlation with corresponding measures in those ranges. This document specifies measurements and procedures which are in relevant parts compatible with those in ISO 13473-1[4], ISO 8608[6] and EN 13036-5[7].