ISO 13506-2-2024 PDF

ISO 13506-2-2024 PDF

Protective clothing against heat and flame-Part 2: Skin burn injury prediction-Calculation requirements and test cases

$71.50 $143.00 -50%
Product Code: ISO 13506-2
Stock In Stock
Edition: 2.
Published: 06/2024
Number of Pages: 26
File Size: 1 file, 1 Byte

Available Options

Product Description

Protective clothing against heat and flame — Part 2: Skin burn injury prediction — Calculation requirements and test cases

Introduction: The purpose of heat and flame-resistant protective clothing is to shield the wearer from hazards that can cause skin burn injury. The clothing can be made from one or more materials, which can be made into a garment or protective clothing ensemble for testing on a manikin fire exposure system. This document is a companion document to ISO 13506-1. The data gathered by tests according to ISO 13506-1 are used as input for this calculation. In ISO 13506-1, a stationary, upright, adult-sized manikin (male or female) is dressed in a garment or protective clothing ensemble and exposed to a laboratory simulation of a fire with controlled heat flux, duration and flame distribution. The average incident heat flux to the exterior of the garment is 84 kW/ m2. Thermal energy sensors are fitted to the surface of the manikin. The output from the sensors is used to calculate the heat flux variation with time and location on the manikin and to determine the total energy absorbed over the data-gathering period. The data-gathering period is selected to ensure that the total energy transferred will no longer be rising. The information obtained from the calculation of skin burn injury prediction (see Annex B) can be used to assist in evaluating the performance of the garment or protective clothing ensemble under the test conditions. It can also be used as a model-based tool to estimate the extent and nature of potential skin damage resulting from the exposure of the test garment. Fit of the garme

Scope: This document provides technical details for calculating predicted burn injury to human skin when its surface is subject to a varying heat flux, such as may occur due to energy transmitted through and by a garment or protective clothing ensemble exposed to flames. A series of test cases are provided against which the burn injury prediction calculation method is verified. It also contains requirements for the in situ calibration of the thermal energy sensor — skin injury prediction system for the range of heat fluxes that occur under garments. The skin burn injury calculation methods as presented in this test method do not include terms for handling short wavelength radiation that may penetrate the skin. The latter include arc flashes, some types of fire exposures with liquid or solid fuels, and nuclear sources.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13506-2-2024 PDF

ISO 13506-2-2024 PDF

$71.50 $143.00