Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating energy efficiency - Part 11: Evaluation of various kinds of efficiency
Introduction: The Kyoto Protocol of the UN Framework Convention on Climate Change defines a system for emission reduction called the Clean Development Mechanism (CDM). In order for the industrial furnace manufacturers industry to address global warming based on the Kyoto Protocol, it is necessary to have fair guidelines to make use of CDM. ISO 13579-1 to ISO 13579-4 focus on evaluating the overall efficiency of industrial furnaces and associated processing equipment (TPE) system, including electrical energy consumption as fuel equivalent energy, to help the industry facilitate implementation of CDM. However, these documents do not define and specify efficiencies of each specific component of TPE (e.g. heat recovery equipment, heating chambers, etc.), which are directly related to and available for energy-saving measures. With this in mind, this document has been developed to specify and provide the following information: — definitions of the various kinds of efficiency of TPE using designation systems and by defining energy balance boundaries within the TPE based on its elements; NOTE The definition for TPE efficiency varies according to region. — evaluation formulae of energy reduction factors, which are available for actual energy conservation based on the energy balance measurements. In addition to these evaluations in terms of enthalpy, this document also deals with energy efficiency based on exergy, i.e. efficiency based on availability of fuel energy, for the following reasons. — The
Scope: This document specifies classifications and designations in the methodology of energy efficiency evaluation of industrial furnaces and associated processing equipment (TPE), including energy efficiency in terms of exergy as well as enthalpy. This document does not apply to the following types of TPE: — blast furnaces, basic oxygen furnaces, coke ovens; — furnaces that generate gases to be used as fuel (including by-product gases); — special atmosphere gas generators; — industrial furnaces that are designed for chemical plants or petroleum plants; — installations where heating or combustion is performed in an open space; — installations that combust solid fuel; — waste incinerators.