ISO 13610-2025 PDF

ISO 13610-2025 PDF

Sludge recovery, recycling, treatment and disposal-Determination of calorific value of sludge

$71.50 $143.00 -50%
Product Code: ISO 13610
Stock In Stock
Edition: 1.
Published: 07/2025
Number of Pages: 24
File Size: 1 file, 1 Byte

Available Options

Product Description

Sludge recovery, recycling, treatment and disposal — Determination of calorific value of sludge

Introduction: The method specified in this document is a simple way to evaluate the amenability of sludge and sludge products to be treated by thermal processes. In this document, some thermo-chemical corrections are not considered. For detailed descriptions of analytical procedures and theoretical background see ISO 1928. The result obtained is the gross calorific value of the sample at constant volume with both the water of the combustion products and the moisture of the sludge as liquid water. The net calorific value can be derived from the gross calorific value. For this the hydrogen content of the sludge is determined. Sludge usually contains much water and (un-burnable) solids. Therefore, the calorific value – especially on the “as received” basis – is quite low. For many purposes it can be sufficient to determine the gross calorific value only, and not the net calorific value for which additional determinations are necessary. The calculation of the net calorific value at constant volume only is described here; for calculation at constant pressure refer to ISO 1928. © ISO 2025 – All rights reserved

Scope: This document specifies a method for the determination of the gross calorific value of sludge at constant volume and at the reference temperature 25 °C in a bomb calorimeter calibrated by combustion of certified benzoic acid. The result obtained is the gross calorific value of the sample at constant volume with both the water of the combustion products and the moisture of the sludge as liquid water. In practice, sludge is burned at constant (atmospheric) pressure and the water is not condensed but is removed as vapour with the flue gases. Under these conditions, the operative heat of combustion to be used is the net calorific value of the fuel at constant pressure. The net calorific value at constant volume can also be used, equations for the calculation are given only as this requires less additional determinations. This method is applicable to all kinds of sludge.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13610-2025 PDF

ISO 13610-2025 PDF

$71.50 $143.00