Graphic technology - Spectral measurement and colorimetric computation for graphic arts images
Introduction: There are many choices allowed when making spectral measurements and performing colorimetric computations. The specific choices made can result in different numerical values for the same property for the same sample. Thus, it might not be possible to make valid comparisons unless the data being compared are all based on the same set of measurement and computational choices. The purpose of this document is to specify a limited number of such choices for the measurement and computation of the colorimetric characteristics of graphic arts images and specimens, such as test charts, to allow valid and comparable data to be obtained. While this document references ISO 3664, the International Standard established for viewing conditions in graphic arts and photography, it is not expected that measured colorimetric data will provide an absolute correlation with visual colour appearance. When the prior revision of this document was started, it was observed that almost all graphic arts specimens exhibited fluorescence. In most cases, this was due to optical brightening agents (OBA) contained in the paper substrates. In rare cases, the printing inks were fluorescent. According to the recommendations of the 1996 version of this document, this would have meant that the source used for the measurements (i.e. the spectral power distribution of the specimen illumination) was required to closely match CIE illuminant D50. Yet when the 2009 revision was started, not a single colour-measuring inst
Scope: This document specifies procedures for the measurements and colorimetric computations appropriate to objects that reflect, transmit and emit light, such as flat-panel displays. It also specifies procedures for computation of colorimetric parameters for graphic arts images. Graphic arts include, but are not limited to, the preparation of material for, and volume production by, production printing processes that include offset lithography, letterpress, flexography, gravure, screen and digital printing. This document does not address spectral measurements appropriate to other specific application needs, such as those used during the production of materials, for example, printing paper and proofing media.