Oil and gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines
Introduction: The successful development of the arrangements required to promote safety and environmental protection during the recovery of hydrocarbon resources requires a structured approach to the identification and management of health, safety, and environmental hazards applied during the design, construction, commissioning, operation, inspection, maintenance, and decommissioning of a facility. This document has been prepared primarily to assist in the development of new installations through their lifecycle. The content of this document is arranged as follows. — Objectives: lists the goals to achieved by the control and mitigation measures being described. — Functional requirements: represent criteria to meet the stated objectives. The functional requirements are performance-orientated measures and, as such, are applicable to the variety of offshore installations utilized for the development of hydrocarbon resources throughout the world. — Annex A: describes typical fire and explosion hazardous events. — Annex B: describes recognized practices that can be considered in conjunction with statutory requirements, industry standards, and individual operator philosophy to determine that the measures necessary are implemented for the control and mitigation of fires and explosions. The guidance is limited to principal elements and are intended to provide specific guidance which, due to the wide variety of offshore operating environments, cannot be applicable in some circumstances. — Annex C:
Scope: This document specifies the objectives and functional requirements for the control and mitigation of fires and explosions on offshore installations used for the development of hydrocarbon resources in oil and gas industries. The object is to achieve: — safety of personnel; — protection of the environment; — protection of assets; — minimization of financial and consequential losses of fires and explosions. This document is applicable to the following: — fixed offshore structures; — floating systems for production, storage, and offloading. Mobile offshore units and subsea installations are excluded, although many of the principles contained in this document can be used as guidance.