ISO 13909-4-2025 PDF

ISO 13909-4-2025 PDF

Coal and coke-Mechanical sampling-Part 4: Preparation of test samples of coal

$113.50 $227.00 -50%
Product Code: ISO 13909-4
Stock In Stock
Edition: 3.
Published: 07/2025
Number of Pages: 40
File Size: 1 file, 5 Bytes

Available Options

Product Description

Coal and coke — Mechanical sampling — Part 4: Preparation of test samples of coal

Introduction: The objective of sample preparation is to prepare one or more test samples from the primary increments for subsequent analysis. The requisite mass and particle size of the test sample depend on the test to be carried out. The process of sample preparation may involve constitution of samples, reduction, division, mixing and drying, or all or a combination of these. Primary increments may be prepared individually as test samples or combined to constitute samples either as taken or after having been prepared by reduction or division, or both. Samples can either be prepared individually as test samples or combined on a weighted basis to constitute a further sample. When difficulty in handling the coal or coals being sampled is expected at a particular stage in sample preparation, or if there is a likelihood of losing moisture by evaporation, it is necessary to withdraw the sample or increment from the on-line system at the stage immediately prior to the point of difficulty and proceed off-line. © ISO 2025 – All rights reserved

Scope: This document describes the preparation of samples of coal from the combination of primary increments to the preparation of samples for specific tests.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13909-4-2025 PDF

ISO 13909-4-2025 PDF

$113.50 $227.00