ISO 13909-6-2025 PDF

ISO 13909-6-2025 PDF

Coal and coke-Mechanical sampling-Part 6: Preparation of test samples of coke

$113.50 $227.00 -50%
Product Code: ISO 13909-6
Stock In Stock
Edition: 3.
Published: 07/2025
Number of Pages: 34
File Size: 1 file, 2 Bytes

Available Options

Product Description

Coal and coke — Mechanical sampling — Part 6: Preparation of test samples of coke

Introduction: The objective of sample preparation is to prepare one or more test samples from the primary increments for subsequent analysis. The requisite mass and particle size of the test samples depend on the test to be carried out. Examples of tests which require different masses are shatter index (ISO 616), Micum and Irsid Index (ISO 556), reactivity tests (ISO 18894), density (ISO 567, ISO 1013) and size distribution (ISO 728, ISO 2325). The process of sample preparation can involve constitution of samples, reduction, division, mixing and drying, or all, or a combination of these. Primary increments can be prepared individually as test samples or combined to constitute samples either as taken or after having been prepared by either reduction or division, or both. Samples can either be prepared individually as test samples or combined on a weighted basis to constitute a further sample. © ISO 2025 – All rights reserved

Scope: This document describes the preparation of samples of coke from the combination of primary increments to the preparation of samples for specific tests.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13909-6-2025 PDF

ISO 13909-6-2025 PDF

$113.50 $227.00